Ancient Advanced Technology Quotes

“The granite complex inside the Great Pyramid, therefore, is poised ready to convert vibrations from the Earth into electricity. What is lacking is a sufficient amount of energy to drive the beams and activate the piezoelectric properties within them. The ancients, though, had anticipated the need for more energy than what would be collected only within the King's Chamber. They had determined that they needed to tap into the vibrations of the Earth over a larger area inside the pyramid and deliver that energy to the power center—the King's Chamber —thereby substantially increasing the amplitude of the oscillations of the granite.
Modern concert halls are designed and built to interact with the instruments performing within. They are huge musical instruments in themselves. The Great Pyramid can be seen as a huge musical instrument with each element designed to enhance the performance of the other. While modern research into architectural acoustics might focus predominantly upon minimizing the reverberation effects of sound in enclosed spaces, there is reason to believe that the ancient pyramid builders were attempting to achieve the opposite. The Grand Gallery, which is considered to be an architectural masterpiece, is an enclosed space in which resonators were installed in the slots along the ledge that runs the length of the gallery. As the Earth's vibration flowed through the Great Pyramid, the resonators converted the vibrational energy to airborne sound. By design, the angles and surfaces of the Grand Gallery walls and ceiling caused reflection of the sound, and its focus into the King's Chamber. Although the King's Chamber also was responding to the energy flowing through the pyramid, much of the energy would flow past it. The specific design and utility of the Grand Gallery was to transfer the energy flowing through a large area of the pyramid into the resonant King's Chamber. This sound was then focused into the granite resonating cavity at sufficient amplitude to drive the granite ceiling beams to oscillation. These beams, in turn, compelled the beams above them to resonate in harmonic sympathy. Thus, with the input of sound and the maximization of resonance, the entire granite complex, in effect, became a vibrating mass of energy.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“I was hoping to be able to get into the Queen's Chamber while I was in Egypt in 1986 to get a sample of the salt for analysis. I had speculated that the salt on the walls of the chamber was an unwanted, though significant, residual substance caused by a chemical reaction where hot hydrogen reacted with the limestone. Unfortunately, I was unable to get into the chamber because a French team was already inside the Horizontal Passage, boring holes into what they hoped were additional chambers. (It was discovered, after I left Egypt, that the spaces contained only sand.)
As it turned out, my research would have been redundant. Noone reported in his book that another individual had already had the same idea and done the work. In 1978, Dr. Patrick Flanagan asked the Arizona Bureau of Geology and Mineral Technology to analyze a sample of this salt. They found it to be a mixture of calcium carbonate (limestone), sodium chloride (halite or salt), and calcium sulfate (gypsum, also known as plaster of paris). These are precisely the minerals that would be produced by the reaction of hot, hydrogen-bearing gas with the limestone walls and ceiling of the Queen's Chamber.
[...]
The interior chambers of the Great Pyramid have the appearance of being subjected to extreme temperatures; and [...] the broken corner on the granite box shows signs of being melted, rather than simply being chipped away.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“In order to draw mechanical vibrations and relieve the stresses that build up within the Earth, we would need an object that would respond sympathetically with the Earth's fundamental frequency. This object would need to be designed in such a way that its own resonant frequency was the same as, or a harmonic of, the Earth's. In this manner, energy transfer from the source would be at maximum load. In harmony with the Earth's vibrations, this object would have the potential to become a coupled oscillator. (A coupled oscillator is an object that is in harmonic resonance with another, usually larger, vibrating object. When set into motion, the coupled oscillator will draw energy from the source and vibrate in sympathy as long as the source continues to vibrate.)
Because the Earth constantly generates a broad spectrum of vibration, we could utilize vibration as a source of energy if we developed suitable technology. Naturally, any device that attracted greater amounts of this energy than is normally being radiated from the Earth would greatly improve the efficiency of the equipment. Because energy will inherently follow the path of least resistance, it follows that any device offering less resistance to this energy than the surrounding medium through which it passes would have a greater amount of energy channeled through it. Keeping all of this in mind and knowing that the Great Pyramid is a mathematical integer of the Earth, it may not be so outlandish to propose that the pyramid is capable of vibrating at a harmonic frequency of the Earth's fundamental frequency.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“Smyth is credited for noting another anomaly in the Queen's Chamber—there were flakes of white mortar exuding from stone joints inside the shaft. Analysis of the mortar found it to be plaster of paris—gypsum (calcium sulfate). Smyth also described this chamber as having a foul odor, which caused early visitors to the chamber to beat a hasty retreat, and it was assumed that tourists were relieving themselves, though the way Smyth described this chamber, few people stayed long enough to do so. However, as I will make clear, this odor may not have been the result of unhygienic conditions but of the chemical process that once occurred in the Queen's Chamber.
One of the greatest mysteries of this chamber has been the salt encrustation on the walls. It was up to one-half-inch thick in places, and Petrie took it into account when he made measurements of the chamber. The salt also was found along the Horizontal Passage and in the lower portion of the Grand Gallery. How did salt come to build up on the walls?”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“The evidence presented in this book, for the most part, was recorded many years ago by men of integrity who worked in the fields of archaeology and Egyptology. That much of this evidence was misunderstood only reveals the pressing need for an interdisciplinary approach to fields that have until recently been closed to nonacademics and others outside the fold of formal archaeology and Egyptology. Much of our ignorance of ancient cultures can be placed at the feet of closed-minded theorists who ignore evidence that does not fit their theories or fall within the province of their expertise. Sometimes it takes a machinist to recognize machined parts or machines! As a result, much of the evidence that supports a purpose for the Great Pyramid as anything other than a tomb has been ignored, discounted without serious consideration, or simply explained away as purely coincidental. Is it coincidence that the Great Pyramid is so huge and so precise? That the King's Chamber contains so many indications that tremendous forces disturbed it or were created within it at one time? Are the exuviae, the chocolate-colored granite, the resonating chambers with their giant granite monoliths placed above, and the unique properties of the quartz crystal present in vast quantities in the granite complex all coincidental? Can the design and physical tests of the movement of sound inside the Grand Gallery be just a happy accident?”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“Steiger presented another analysis by a professional engineer, who saw the wall carvings at Dendera as an accurate illustration of an electrical device—one which would not be out of place in a modern electrical blueprint file. "In regards to the ancient Egyptian electron tubes, electromagnetic engineer Professor S.R. Harris identified a box-and braided cable in the picture as 'virtually an exact copy of engineering illustration used today for representing a bundle of conducting wires.' The cable runs from the box the full length of the floor and terminates at both the ends and at the bases of two peculiar objects resting on two pillars. Professor Harris is said to have identified these representations as high voltage insulators.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“When we study the past seeking evidence of a highly advanced culture, we should not expect to find objects that we associate with our own culture. Different cultures develop along different paths. This process occurs even over relatively short periods of time, especially when one society is isolated from others. For example, when the Allies went into Germany after Hitler's defeat, they found that after only twelve years of isolation German technology was being developed along lines vastly different from our own. Pauwels and Bergier wrote:
'When the War in Europe ended on May 8th, 1945, missions of investigation were immediately sent out to visit Germany after her defeat. Their reports have been published; the catalogue alone has 300 pages. Germany had only been separated from the world since 1933. In twelve years the technical evolution of the Reich developed along strangely divergent lines. Although the Germans were behindhand as regards the atomic bomb, they had perfected giant rockets unmatched by any in America or Russia. They may not have had radar, but they had perfected a system of infra-red ray detectors which were quite as effective. Though they did not invent silicones, they had developed an entirely new organic chemistry, based on the eight-ring carbon chain. [...] They had rejected the theory of relativity and tended to neglect the quantum theory. [...] They believed in the existence of eternal ice and that the planets and the stars were blocks of ice floating in space. If it has been possible for such wide divergencies to develop in the space of twelve years in our modern world, in spite of the exchange of ideas and mass communications, what view must one take of the civilizations of the past? To what extent are our archaeologists qualified to judge the state of the sciences, techniques, philosophy and knowledge that distinguished, say, the Maya or Khmer civilizations?”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“The knowledge needed to evaluate certain of these ancient artifacts was not available until very recently. Even today there may be numerous articles that we will not understand until we further develop our own technology. We cannot fathom technology that is unknown to us, and we seldom consider things that seem impossible to us. Petrie, though knowledgeable in engineering and surveying, could not be expected to know anything about ultrasonic machining; hence his amazement at the machining abilities of the ancient Egyptians. Even if he had been aware of this technology, the intellectual climate of his time may have precluded his considering the possibility that these methods were known to the ancient Egyptians. Quite simply, the greatest barrier to our understanding may not necessarily be knowledge. It may be attitude.”
― Christopher Dunn, The Giza Power Plant: Technologies of Ancient Egypt

“The sheer volume of granite, diorite, and alabaster that was cut precisely into statues around Luxor attests to the ancient Egyptians' mastery of their craft. The Greeks and Romans did not sculpt statues in igneous rock. Granite was not fashioned into statues until the development of more modern power tools with steel bits. In "The Materials of Sculpture", Nicholas Penny writes: "Granite had occasionally been worked in shallow relief, for architectural ornament where it was the local building stone, and for the stiff figures of sixteenth-century cavalries in Brittany, but, before the advent of improved metals and power-driven tools in the nineteenth century, the idea of making statues out of it was seldom seriously entertained by sophisticated sculptors.”
― Christopher Dunn, Lost Technologies of Ancient Egypt: Advanced Engineering in the Temples of the Pharaohs